Conflict Monitor Tester

The PCMT-2600 is capable of

testing Conflict Monitors as

defined by NEMA TS1, NEMA TS2,

FHWA/CalTrans System 170, and

ODOT/TXDOT 2070 Standards

SDLC Port 1 Tester

The SLNK-3000 adapter adds testing

of the SDLC port to the set of tests performed

by the PCMT-2600 conflict monitor tester

ITS Cabinet Monitor Tester

The ICMT 4000 tester runs a series of tests

on the CMU-212 and the AMU-214 to verify that

the units function in accordance with the

AASHTO/ITE/NEMA Intelligent Transportation

Systems (ITS) Standard Specification

for Roadside Cabinets.

Load Switch, Relay and Flasher Tester

The MST-700 is an automated tester

designed to test Load switches,

Flashers, and Transfer Relays

conforming with NEMA and

CalTrans specifications.

Bus Interface Unit Tester - Available Year End 2010

The BIUT-820 is designed to run a complete

set of standards-based tests on a NEMA TS2

Bus Interface Unit (BIU). This set of tests will

confirm the performance of the BIU to the

timing and functions defined by the NEMA

TS2-2003 standard.

TS2 Frame Grabber

The "TS2 Frame Grabber" allows technicians

to graphically view, sort, and analyze all

SDLC frames that were transmitted in the

30 minute period leading up to the

intersection going into "flash" on NEMA

TS2 cabinets.

NEMA TS2 Analyzer

The TS2 Virtual Cabinet

emulates NEMA TS2 cabinet.

Gives the user the ability to

test timing and other programming

parameters of a NEMA TS 2 standard controller.

Surge Suppressor Tester

The SST-450 Surge Suppressor Tester

is designed to quickly and easily test all

commonly used transient voltage suppressors:

metal-oxide varistors (MOVs), gas-discharge tubes (GDTs),

silicon avalanche diodes (SADs),

thyristor surge protective devices (TSPDs), and hybrid devices.

Loop Detector Tester

The Quick Check 330 will test all types of rack

detectors and one channel or two

channel NEMA shelf-mount detectors.

Inductive Loop Test Kit

The HILT 9000 Kit is easy to use,

with quick and accurate tools designed

to test and measure the parameters of

inductive loops used in the Traffic Signal,

Vehicle Data Collection, and Parking industries.

Inductive Loop Finder

The LF-22 Loop Finder is a hand held

tester designed to let the user "see"

the electromagnetic field given off by

an active inductive loop and provide a

visual indication of the loop's signal strength.

Automated Traffic Recorder Tester

The ATRT-1716 is an automated tester

of counters and classifiers used in

today's traffic industry. The tester is

designed to simulate any type of highway

vehicle passing over a user-defined array

of highway traffic sensors.