Note: Firmware upgrades and modifications can be seen by clicking on the "info" button
in the firmware update program.
Software modifications:
Version 1.13:
- Xfer relay contact agreement test added to TS1 and TS2
Version 1.12:
- Reduced operating voltage range from 94...96 volts down to 94.4...95.6 volts
Version 1.11
- Updated switch settings in the help files
Version 1.10:
- Remember last open location
- Remember last save location. Goes to that location if the "Create Year/Month" setting is unchecked.
- Changed content of the switch settings help page for PEEK 12ELRA & 6ELRA
- Added NYC Brownout to 2010 monitor. Requires MSM201HB or better.
- Fixed bug that would cause the software to "forget" some of previous entries on the monitor setup form.
Version 1.9
- Fixed "Cannot find PCMT" problem when trying to update firmware
Version 1.8
- Added optional TS1 watchdog test
Version 1.7
- Added beeping to the program - Beeps when user action is required.
- Added option to skip permissive tests with blank intersection card in Certification mode.
- Fixed printing/page margins problem.
- Removed walks from single channel test description.
- Fixed counting of single channel tests.
- Removed Port1 indicator test for TS2 type 12.
- Added Software version to the report.
Version 1.6
- Help files update.
- Minor Interface fixes.
Version 1.5
- Added functions to rerun permissive tests with programmed card.
- PCMTflash: proper message is displayed when opening a corrupted fup-file.
- Add a "WD Indicator test" to the 210 with Reds file.
Version 1.4
- Removed Port test from MMU8 (in data-files)
- Moved Constant reset into optional group for 210 with and without reds
- Fixed multi-port mode: responds properly when trying to use COM2 while nothing is connected to COM1.
Version 1.3
- Bug fixed which caused the error message "xx/xx/xxxx is not a valid date" when trying to connect to the tester.
Version 1.2
- Removed DC Inhibit from TS2 MMU8 data file.
- Links in the help files are fixed.
- Help for Optional presets window is added.
- Critical condition response message is more descriptive "ERROR: ...".
Version 1.1
- Fixed the error message that would appear on some computers when trying to closed the program.
Version 1.0
- First release of PCMT-2500 interface software.
With free Acrobat Reader software, you can view and print Adobe PDF files.
| 
